Counting matching models…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
IF YOU DOWNLOAD THIS MODEL, PLEASE TAKE 1 SECOND TO RATE OR LIKE IT… THAT IS ALL I ASK IN RETURN, THANK YOU. In this video I will show you how to install an all metal hotend kit on the Creality CR-10 Smart 3D printer. Currently, there are…
Remix from “ Air65 Canopy (low angle) ” by raNn . Une nouvelle canopy à imprimer en TPU pour le BetaFPV AIR65 : Incassable Permet des tilts beaucoup plus bas Attention : Ce n'est pas indispensable, mais une impression “dur” facilitera les…
UPDATE 3: IMPORTANT only use these new files with the cutout for the U.FL socket (see images). The old design by BetaFPV likes to knock the U.FL right off the board… Ask me how I know. If you're in a similar situation, I wrote up a quick…
BMW R60/2 1964 Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA Rems do not use Supports!! only rems: Speed 60mm/s
This is NOT the lighter "Air" frame (yet). This is the standard Pro edition, which can support up to 35mm props (but not HQprop as they are larger). Also keep in mind that the AIO mounting is 26mm and may not work with all whoop style…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Original: https://www.thingiverse.com/thing:3198581
Case for the BetaFPV Air65 TinyWhoop
Do you have the fantastic Tribute64, Brawler64 or Admiral BT wireless gamepads, but notice that the dongles that plug into the front of your console...sag? This is especially true with the Retro Fighters Brawler64 and made worse with a…
With this design you can mount your TP-link ER605 and OC200 the proper way. You wil also need the Ubiquiti Networks ER-RMKIT. I used M3 10mm screws to screw the printed parts together.
In this video I will walk you through the installation of a Bondtech LGX Lite Extruder onto a Creality CR-10 Smart (should also work for CR6-SE? someone please confirm in the comments section!) to convert this printer to direct drive.…
CR6 universal dual fan 5015 part fan shroud This part fan solution provides a dual fan shroud and uses a 5015 blower fan that will fit on most hot ends (checked with stock, Dragon, Mosquito and MicroSwiss hot ends). The part replaces the…
Wheel model for RC drifting.
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
Model of an R6 unit astromech droid.
Spare parts roller of LG Magic Remote AN-MR650A - works well small part of code wheel may require sanding depending on print accuracy
Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…
A friend recently discovered the TP-Link ER605 Firewall/Router/Switch, great device for the money! Well I needed a way to mount this in my 19nich rack. This 1RU shelf will allow for 1 or 2 ER605 devices to be mounted. Each mount has a…
This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…
The original PSU mounting bracket got lost for a bit so I needed a replacement. Tested for fit on Fractal Design Meshify 2 Mini. Should fit on other models as well, if the internet is to be believed.
A simple, small box for storing and safely transporting the Air65 drone and 10pcs LAVA 1S 300mah (260mah) batteries
USRockets did an amiazing job on R2D2 that I have whipped up several heads, I have sucessfully printed this and will post pics of the finished painted model soon. Other components can be found here…
These are just a remix of the original Prusa Anti-Vibration feet by Alexander designed to fit over the rubber feet on the CR-10 Smart Pro, may also work for the CR6-SE and CR-10 Smart but I cannot confirm.
Vatuhiva has modelled an extruder body where a BL-touch can be mounted to the R4 extruder, but i happend to print the R6 version. So i chopped of the original sensor mount and added a snippet of his design so it would fit for sure with…
Cross-sectional model of a combustion engine, made of plastic, movable model with a hanger holder
A pluggable battery holder that allows you to fly your BetaFPV Air 65 with bigger battery packs like 450mah / 550mah or any battery pack of 17mm of width. Optionally use a M2 screw to secure it to the frame. Sources available!
TP-Link Omada ER605 and SG2008P 1U Rack Mount
Holder for dripping resin from the printing plate. The holder is for the Creality Halot R6 printer. Print settings: PETG Resolution: 0.20 mm Infill: 20% Support: YES ---------------------------------------------------------- Držák na…
Wall Art silhouette model of the Yamaha YZF-R6 2018 superbike. Adjustable size. I accept model suggestions.
Air65 canopy ultra light.
How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…
This tiny bit of plastic lets you decrease the tilt you can apply to the camera on the Air65 and Air75. This lets you fly slower and still see straight ahead. Weights under 0.1g, which is probably less than most of the other solutions…
As the name describes it it's a little adapter that makes it so that you can mount your side mounted spool holder on top of the machine, it's someone else's design originally but I remixed it so that I could mount it on top of my CR10…
G11 drive tray for 2.5 inch drives for Dell R610. I edited the screw holes to fit more common screws used for 2.5 inch drives. Edited from a different version found on Thingiverse ( https://www.thingiverse.com/thing:3715861 ) Print…
Part cooling fan for the Creality CR6 SE that uses the stock blower flan but directs the airflow closer to the nozzle. Version for 40mm quiet fans: https://www.thingiverse.com/thing:4777287 Print Settings Printer Brand: Creality Printer:…
A Deco effect at the top near the game console 6 different versions to store your batteries in a giant batterty : Classic version without engraving for LR6 and LR3 Batteries Engraved version for LR6 and LR3 Batteries Bicolor Version for…
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…
I made that prop to see if I can make accurate prop with very limited time and technical resources. If you print in resin, use: blade right features and blade left features and then paint it in preferred colours. To make pattern pop i…
A screwless caddy for DELL PowerEdge R310, R320, R410, R415, R510, R515, R610, R710, T610, T710. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 200 Infill: 20 Filament: eSUN PLA Notes: Customs…
You can modify the model slightly to fit other printers that use v-rollers for carriage movement. For popular printers like an Ender 3 I recommend browsing existing models Infill: I went 50% with gyroid pattern for strength Layer Height:…
MR128, MR62 and MR52 bearings.
I haven't seen many roblox figures with joints, so here. The tolerances might be too tight or too loose. PETG would probably work best for this, but PLA works too. However, it does get very loose after a day. Note: My friend told me that…
Creality CR6 SE drawer organiser
I modified the Prusa MK3S+ R6 Extruder body to fit the 12mm probe. Upravil jsem tělo extrudéru Prusa MK3S+ R6 tak, aby se do něj vešla 12mm sonda.
Rack mount for TP-link ER605 router and/or TL-SG108PE switch Files are only provided in one direction, don't forget to mirror to make the complete 1U unit Holes are 3,5mm. Use M3 screws and nuts. I had to redrill. I printed mine in very…
Just a simple remix to add the ability to use a M10 fitting. You need 2x M3 30mm screws Instructions: Print with supports! For V1: You should test to see if the filament goes through the end, but it probably won't! So you need to use some…
You'll need a longer M3 screw, and the orogonal cap and parts.
The model provides a drop-in replacement for the standard CR6 SE spool holder, with options for 3 or 4 608 bearings ensuring a smoother rolling of the filament spool. The original goal was to reduce the oscillations caused by the original…
I have not found a suitable modification to the excellent print fan shroud created by RH_Dreambox: https://www.thingiverse.com/thing:4376765 to suit the Mk3S+ (the latest Prusa extruder design marked R6). There is one solution prepared by…
Update: Oh my! I forgot an STL file. Here is my V1 STL. Need help finding working drone frames. I designed my drone in Solidworks and the files can be found on grabcad. I am not finding real drone frames that work with real motors and…
Meteor65 Pro Antenna Restrainer Updates [14/02/2024] Rearranged cup direction to produce a flat surface, allowing for easier and better print quality on lower-end printers. See model name (…..revised.stl) Features Prevents the antenna…
a nice, sleek, vertical spool holder mount for the cr6se Print Settings Printer Brand: Creality Printer: CR6-SE Rafts: No Supports: Yes (PRINTBED ONLY!) Resolution: 0.2, 4 WALLS Infill: 40 Material: PLA, if you use an enclosue print in…
They work perfectly fine and snuggly fit. My recommendation is to print them using PLA+. My Settings are listed below: Layer Thickness: 0.28mm Infill: 50% - Cross 3D Print time on a Ender 3 Pro with a mainboard upgrade and BL Touch: 11…
Camera mount for the BetaFPV Meteor65 and 75 pro. Gives you 15 degrees of camera angle. This does require a small amount of trimming to the bottom of the camera opening on the canopy. I had great success printing this in PETG. 3 walls…
Overview: This mount is part of a growing series of mounts for different hotends and extruders to the CR-6 strain gauge. The series includes the Dragon, Mosquito and MicroSwiss hotends and the Orbiter V1.5, LGX Lite, Mjolnir and Bowden…
A 3d model caddy suitable for 2.5" HDD/SSD. Perks: compatible with Dell servers R610/630 (perhaps others too); the caddy can be easily plugged in and pulled out; has a little space for marker numbering or to put a sticker on it; allows to…
passer votre cr6 se en direct drive! permet d imprimer du flex sur cr6
A remix of the original universal dual fang shroud from K2van. This version has holes added to lower the weight, and the bar that holds it up has been lengthened to ensure stability when it is in in the most extended position. I find that…
Camera mount on the end of the X-Axis Tension Adjuster. I needed a camera mount for Octoprint for my Ender 2 Pro. All the ones out there interfered with the screen since it was on the left, and couldn't see the nozzle due to the unique…
A custom Filament Sensor Mount for original Creality filament sensor, with mounts for PC4-M10 fittings.
With this print you can mount modern 3.5 Slot GPU's like a RTX 4080 (e.g. Palit Gamerock 4080) vertically inside the older Define R6 combined with the VRC-25 Riser (REQUIRED) from Fractal. I Included the .3mf file for optimal printing…
Got a second-hand Define R6 case to fill up with drives, but it only came with one useable tray. So instead of paying above the odds for them online, I messed around in Fusion 360 and made my own! Nice snug fit, has the same tab that the…
Mix of TL-FC25 and TL-FC32 to help (dis)assembly of bottom brackets by Shimano
A DIY BGA reballing jig for GDDR6X chips. Stencil size: 0.7" x 0.62"/17.82mm x 15.84mm ---------------------------- Parts Screws & nuts: [Link] [4x]M2x6mm [4x]M2x8mm Magnet: 3mm tall, 8mm in diameter. ---------------------------- Print…
Creality CR6SE Universal Camera Holder with movable arm. Easy to print. You can mount your camera in many positions on the arm. Simply mount it where it fits you the most. Infill: 30% Supports: Yes (It is better with them) Use M10x25…
Orbiter V1.5 extruder mount to the Creality CR-6 CR6 strain gauge with stock hot end OR MicroSwiss all metal hotend. This is part of a series of different hotend and extruder mounts directly to the CR-6 strain gauge. Most probably these…
Diseño de la tapa del extrusor de la impresora Creality CR6 SE. Está basado a partir de un archivo encontrado en Onshape, pero este no era igual al original. Se subieron los archivos .3mf adaptados para dos laminadores CR6SE_Tapa…
This is a 60 mm male adapter for the osVAC system by Hobbyhimmel. Weitere Links/Details: Allgemeine Infos zum osVAC System: https://ossso.de/osvac/ Weitere Adapter von Hobbyhimmel:…
This is a canopy for the BetaFPV Air65 (C03 camera) tiny whoop FPV drone with a camera angle of just 15 degrees, perfect for indoor flight. It allows slower and more controlled flight. The canopy is also reasonably light weight and…
These body mounts allow you to mount the Injora IR60 body on the Redcat Ascent 18 truck. The body hinges on the rear about 120°, allowing it to stay open by itself and have full access to the internals. The front magnetic latch uses two…
I split the original down to fit a single hex insert on the HSW, and just to hold the Allen Keys set provided with the CR6. Same holder works with Ender3 set.
I have adapted the case from user Hero. once. Now it fits eight 300mAh Lava batteries and on the lid you can find the outline of Sailor Moon ( the case is for my girlfriend ) - of course only the bottom part can be charged, as it is…
This bracket allows you to mount a ER6 or ER8 in places where double sided tape may not be reliable. An STL file is included If you want to tweak it using OpenSCAD: Using OpenSCAD download OpenSCAD https://openscad.org/downloads.html open…
I really liked the idea of Randyre's C270 mount that clips onto the end of the X-Axis belt tensioner. However, I wanted it closer to the gantry to be more out of the way, and wanted to be able to quickly remove the camera if I want to…
Flat on the bottom, no support needed
This is a 1s Lipo cage and adapter for tiny whoops, its meant to be inserted in the 11mm battery holder to use bigger 550mah lava batteries, it also protects the batteries from being smashed if you crash. it weights roughly 3.4g. Print…
This funnel will assist with filling the engine oil on a 2001 Yamaha YZF-R6 motorcycle. I cannot say for sure if this would fit other motorcycles, but it is fairly narrow and should fit most M27 threaded filler ports. This was printed in…
UPDATE 27/05/2022 Added the other parts of the original file, simplified for faster and easier printing. Added some instructions for the top parts, see image You need to print: z axis brace top right z axis brace top left z axis brace…
.3mf Files. Foots, Feet, Legs, Patas, Pies for / para CR6SE & Ender 3v2 (49.923mm) CCR6SE_E3v2_CR6SE_Feet.3mf CE3PRO_E3v2_CR6SE_back_Feet.3mf Soporte de patas en TPU / TPU legs support CE3PRO_Soporte TPU pies.3mf
This is an osVAC adapter for the Metabo Planer DH330. The larger end has an inner diameter of 65.5 mm. Printed with 50% infill, a brim, and the large end touching the bed. ********************* Dies ist ein osVAC-Adapter für den Metabo…
Spektrum AR636 AR637T AR637 Mount
I bought myself a Fractal Design Define R6 and noticed that one Corner of my Sidepanel was very loose. By further Inspection is noticed das this Clip that holds the Pin of The Door was Broken. So i pulled out one of the other intact Clips…
Round Corner Templates (R5-R60) to help you mark the corners. Just hook the template over the corner and mark it with a pencil.
CR6 SE Cable clip Guide with bowden Tube holder
Designed for vase mode w/ .4 nozzle This is a 550mah Battery Clip for the BetaFPV Meteor65 Pro that usually uses the smaller 300mah batteries. Flexible! Designed to print in vase mode and in PLA. Very light - .6g by filament calculator in…
Case for double A(AA)/R6 batteries with hinge(Print in Place) Print Settings Printer: Sovol SV06 Plus Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: Elegoo Rapid PLA+ PLA+ White Category: Tool Holders & Boxes
If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. Estes released model rocket #1301 - R2-D2 Robot Hero in…
Frustrated with the fragile and difficult-to-source stock canopy for the BetaFPV Air65? The original canopy, while lightweight, breaks easily and offers limited, cumbersome camera adjustment. This design allows you to upgrade to a more…
I got fed up with existing tensioners for my printer and made these ones from scratch. You're gonna need four M5 bolts, two for the tensioners and two for mounting the Y tensioner. The required length is anywhere from 1 to 2cm, depending…
Remix of @DevineJimmi ‘s 10 inch ER605 rack mount , I’ve added a couple of keystones to help with routing WAN etc in my mini rack. Removed the text too to make it easier to print for me (hope that's ok, please check out the original!)…
Wall mount for TP link Archer MR600 ASA 0,2
Not mantained anymore Switch to this model instead, which I made in CAD myself and it is easier to mantain and create newer versions (and you can also do it yourself because the step files are provided)…
I bought a WhamBam magnetic PEX buildplate for my CR6 and wanted to punch holes in the magnetic sticker for the build plate screws. This is NOT exact measurements for the screws, but it was good enough for my purposes.…
Enclosure for a Beelink Ser6 MiniPC along with an External Hard Drive for a super portable LAN party gaming computer. Includes BricsCAD (AutoCAD Compatible .dwg) model file. Designed in BricsCad. Vesa mountable to back of Monitor.
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
