Kywoo Tycoon Cooling Shroud Upgrade with High-Performance 4020 Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces the original 4010 with same screws
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 73
- Makes
- 0
- Views
- 611
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
The original cooling setup for the Tycoon uses a single 4010 fan placed under the extruder, which is insufficient for effective airflow. Although other setups with 5015 fans exist, they tend to be complicated and do not make use of the original attachment points.
I designed a new shroud to accommodate a 4020 fan, which offers a significant improvement over the stock fan. It reuses the original screws and stays clear of all components, ensuring easy installation. Depending on your print, you may need to adjust the screw hole depth for the best fit.
The shroud is best printed in PETG, as PLA is not recommended due to its proximity to the hot nozzle. In my tests, PLA near the nozzle became brittle, discolored, and would likely fail over time from heat exposure.
For convenience, I have included the STEP file if you wish to customize the design further.