Subaru transmission shifter linkage seal driver
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.00 – €2.44 net (excluding VAT)
For file: TRANSMISSION_SHIFTER_LINKAGE_0.2mm_PETG_2h42m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.22 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 2.7 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Driver for transmission shifter oil seal
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 54
- Makes
- 0
- Views
- 386
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Subaru transmission seal driver for shifter linkage
fit 2002 to 2007 6speed transmission. Should fit other years but can't confirm. Can't confirm for 5speed either. Let me know !!
Confirm for oil seal part number: 806716070
Make sure to use a lot of perimeters and infill.
Provided .gcode are for:
Filament: PLA or PETG
Nozzle Size: 0.4mm
Print Height: 0.20mm
Infill: 25%
Perimeters: 3