1 / 3
Altoids ratchet set 5-12 mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder for a minimal ratchet set inside an Altoids tin.
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 80
- Makes
- 0
- Views
- 1,024
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
The Idea:
- organizing a minimal ratchet set inside an Altoids tin
Design Process:
- I used a little notch in the top right to make a really tight fit inside the tin
- down below is a svg file for the numbers included
- as you can see, the tin still closes perfectly
Overall dimensions:
| weight | height | width | depth |
| 30 g | 16 mm | 91 mm | 56 mm |
Print recommendations:
- 0.4 mm Nozzle
- 0.2 mm Layer height
- 15% Grid Infill
- no Supports
Post Processing:
- maybe some deburring, but not really needed
Additional Parts:
- I printed a label and glued it under the insert (Numbers.svg)
Assembly:
- it's a pretty tight fit, that's what the notch is for
- squeeze it together and push it under the top lip of the tin and after expanding it shouldn't fall out again
- optionally you can glue it in place, so the numbers on the label will always line up
Related Models:
Minimalist Altoids Organizer for Nozzles
Minimalist 3-way Altoids Organizer for T-Nuts