420 14mm bowl Multipliers/angle extension joints
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made some 14mm bowl multiplier, because I saw a glass one and I wanted it! So I made it. In testing of the quad/dual…
- Rating
- 0 / 5
- Likes
- 46
- Downloads
- 240
- Makes
- 0
- Views
- 851
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I made some 14mm bowl multiplier, because I saw a glass one and I wanted it! So I made it.
In testing of the quad/dual I found that the bowl multipliers can be too close to your face because of the height they add to your down stem. To remedy that I designed some angle joints and extenders which are also on this post.
And what I really love is every single one of those pieces are interchangeable stack-able they’ll work with each other, because they were made for each other!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
Yes
Resolution:
dynamic
Infill:
20
Filament: INLAND PLA Silk Silver
Notes:
Supports Touching Build-plate Only
Extruder temp: 220Build-plate temp: 70
walls: 3
top/bottom layers: 6
speed 50
support overhang angle: 50
flip all models on their head to print, photos of orientation are above.
Category: Parts