1 / 3
Sagging Stepper Support (Parallelism fix for X axis)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two printed parts. One large bolt (outer dia. up to 6.6mm) required. Used to lift the base of a printer's x-stepper if…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Two printed parts. One large bolt (outer dia. up to 6.6mm) required.
Used to lift the base of a printer's x-stepper if it begins to sag. My printer's left carriage is made of PLA and began to warp a bit when the x-stepper overheated (voltage was too high), leaving the x-axis drive system slightly out of alignment.
This is a temporary fix until I design and print carriages that don't have this problem!
Category: 3D Printer Parts