P1P front plastic cover rebuild for glass door and glass top lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replacement for the original front cover that enables you to use the glass door and top lid from X1C on P1P.
- Rating
- 5 / 5
- Likes
- 69
- Downloads
- 254
- Makes
- 3
- Views
- 3,087
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Standard Digital File License
Update 14.05.2023:
Added the Door only - Version
Updated the SD card slot on the 3mm - Version
Update 04.04.2023:
Added the One Piece - Version
Added the 3mm - Version
-----------------------------------
If you need a different version as the avaliable versions, just ask me and I will design it.
-----------------------------------
Here are the avaliable versions:
Normal - Version:
The Normal - Version has the same shape like the original front cover with some changes to fits for the glass top lid and the glass front door from the bambu lab shop.
One piece - Version:
It's the same like the Normal - Version just in one piece for someone who has a larger printer to print it in one piece. This file is not printable on a bambu lab printer and requires a minimal bed diagonal of 40 cm!
Door only - Version:
It's the same version like the Normal - Version but only for the front door. There are no changes for the top lid and it's like the original front cover on the top side. Only the changes to fit the front door are made there.
3mm - Version:
The 3mm - Version is for someone who needs a 3mm thicker top, for a thicker top lid like a 6mm acrylic lid for something like the ARK enclosure, so the front cover is even with the acrylic lid. Use this only if you use a 6mm acrylic top lid!
-----------------------------------
This is a replacement for the original front cover that enables you to use the glass door and top lid from X1C on the P1P.
-----------------------------------
How to replace it you can see on this guide https://wiki.bambulab.com/en/x1/maintenance/replace-button-board step 6 and 7 or in this video guide https://wiki.bambulab.com/en/x1/maintenance/front-door-mounting-kit .
-----------------------------------
For the front door you need the glass front door and the door hinges from the bambu lab shop:
https://us.store.bambulab.com/collections/printer-parts/products/front-glass-door
https://us.store.bambulab.com/collections/printer-parts/products/front-door-mounting-kit
For the top glass lid you need the top glass from the bambu lab shop:
https://us.store.bambulab.com/collections/printer-parts/products/glass-cover-plate
-----------------------------------
If you get any trobles just tell me and I will try to solve it.
To glue is not nessecary but you can, to make it stronger.
For printing you can use fuzzy skin, I didn't used it because it's just a prototype till I have my fully enclosure done.
But please use:
- Outer line: min 0,3mm (for more accuracy at the small parts)
- Detect thin walls
Everything else is your choice. I used 3 walls, gyroid 15% infill.
Have fun printing it.
-----------------------------------
P.S.
On the last picture it looks like the new one is bigger than the old one. That's an optical ilusion.
P.P.S.
I build this front plastic cover from scratch because the bambu files are garbage.