Case for sugar meter and alcohol meter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.01 – €4.90 net (excluding VAT)
For file: AlcoholMeterCaseLid_0.2mm_PETG_MK3S_4h24m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.46 excluding VAT (range midpoint).
- Weight reported by the author
- 61 g
- Print time reported by the author
- 4.4 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Case for alcohol meter and sugar meter.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 21
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for alcohol meter and sugar meter. A support was added to the case model, which you can easily remove after printing. I used a fork to break it out.
There is a pre-prepared opening for a magnet on the lid and case:
- disc/cylinder shape
- size 5x2mm
It is advisable to line the case with foam to prevent damage to the meters. I personally only use a paper towel.
Púzdro pre liehomer a cukromer. Do modelu púzdra bola pridana podpera ktorú jednoducho po vytlačení vyberiete. Ja som na vylomenie použil vidličku.
Na vrchnáku a púzdre je predpripravený otvor pre magnet:
- tvar kotúč/ valec
- velkosti 5x2mm
Je vhodné vystlať púzdro penou, aby nedošlo k poškodeniu meračov. Ja osobne používam iba pepierovú utierku.