Single 9V Battery Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple case in which one can store a single 9-volt (9V) battery.
- Rating
- 4.875 / 5
- Likes
- 50
- Downloads
- 483
- Makes
- 8
- Views
- 1,171
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This simple case is designed to fully enclose a standard 9V (9-volt) battery.
It is sized to just fit the maximum dimensions of a 9V battery. The case itself is 2mm thick with a removable lid. Though it's not completely watertight, the case should prevent liquids from reaching the battery, and the fully-enclosed top should prevent any chance of short circuits.
The top of the lid is labeled with an embossed “9V” for easy identification.
I've printed the model in (Prusament) PLA with a 0.15mm layer height. Infill is not necessary due to the thickness of the walls (2mm). Supports are not necessary. Just arrange the lid and base with the flat face down on the print surface.