Glasses case
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.13 – €0.15 net (excluding VAT)
For file: Hexagon_0.2mm_PETG_MK3S_12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 10.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A nice glasses case with a hexagon pattern.
- Rating
- 3 / 5
- Likes
- 102
- Downloads
- 342
- Makes
- 2
- Views
- 5,341
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- GNU General Public License v2.0
A nice glasses case with a hexagon pattern with the following hexagon plugs that can be mounted as you like / if you like.
The lid does not need any support while the case does. tried printing the case on the "right side" (bottom down) to avoid so much support, it turned out to be an ugly bottom. Maybe it's a support setting I've missed?
After I have covered the bottom and the lid with an "insert" of the type FilaFlex40 filament that I have spray-glued on, it does not matter if the surface of the support becomes ugly, it will be hidden.
I use regular 1.75mm PETG filament to hold the case together with the lid, can be a bit tricky to get the filament in the hole. I had to clear the hole a bit before getting the filament in place.
Press into place 2 pcs 8mm Ø x 2mm magnets.
Inside dimensions of the case is 25x45x144 mm.
Update 2024-07-23
Have made improvements to all parts, such as making a softer edge on the case so that the lid and case open more easily.
I have also made the holes slightly larger (but not much) so that it might be easier to thread the filament thread.
Lid_Glassescase Version1.STL
Glassescase 21mm.STL
Glassescase 34mm.STL
Update 2024-11-20
Updating the lid. A cleaner look with a more accurate polygon pattern. Remember to also download the correct hexagon decoration for the lid, a tip is to glue these to the lid.
Hexagon v2.STL
Lid_Glassescase Version2.STL
Lid_Glassescase Version2.3MF
Happy printing!!