Kyosho Monster Tracker 2.0 Battery Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement cover to stop your battery from falling out if you've lost it or it's broken.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- GNU General Public License v2.0
We lost our cover so I've made a replacement one.
This is compatible with the Monster Tracker 2.0 RC Car,
But there are a bunch of other models that use the same cover.
For a full list of them checkout this link:
https://rc.kyosho.com/en/compatible/index/index/product_id/5386/
Supports:
At first I thought you wouldn't need supports but turns out the two little tabs on both the ends sag a little so it does need supports!
Be sure to place a support blocker in the middle of the model (Making sure the two end tabs are not inside the blocker) otherwise without this your slicer will generate supports where it is not needed and will be a pain to remove afterwards.
If you are unsure how to do this or don't know what I mean just download the pre-sliced file
I have attached 3 different files:
1st File is a Pre-sliced file so you can plug straight into your printer.
2nd File is a regular file you will need to slice yourself. (Don't forget to use the support blocker as mentioned above.
3rd File is a 3D Modeling file so you can edit the model in Fusion 360 (Or whatever you use) to change/add anything you please.