Mouse holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a minimalistic underdesk-mouseholder with an open front, so you can charge your mouse while you dont need it
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 405
- Makes
- 7
- Views
- 2,237
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
I found some Mouseholder-designs, but i prefer my holders with less material, less print time , thinner and somewhat curvy. Since there was no design i really liked, i designed it on my own to fit a Logitech G502X and a Cherry DW9500 Slim.
I designed the back side to be open, so you can save filament and you can route a charging cable right through there, so your mouse can charge when you dont need it.
You can screw it under your desk or - preferably - glue it there with doublesided tape. If you still want to screw it and save screws, I added a central screwhole, so you can mount it with just one screw.
I added a little depressed area, so your mouse stays safe and you can pull it out by the sides or from the lower side.
The inner measurements are 81mm x 46mm x 122mm
No need for supports, but change the wall thickness to 3mm