1 / 4
Markslöjd Tulip Clip replacement wall mounting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
As the clip part of the lamp keeps breaking I decided to make a wall mounting for it instead.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
I used 3 walls and 40% infill to make it more sturdy, but you can probably get away with 20% infill. 0.2mm layer hight, any PLA. Use PETG if you need to move the lamp a lot.
The picture of the wall mount is version 1 where I forgot the cable had to get in there, hence I made a version 2 with a gap for the cable so I didn't have to take the switch apart.
Did a few revisions on it and version 5 is now the one to use. Please note that the nut has to go on the side with room for it on version 5.