Drone Carry case - BetaFPV Cetus X Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drone transport case made from recycled BetaFPV Cetus X starter kit case
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 38
- Makes
- 1
- Views
- 1,786
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I built the Cetus X into an Apex 2" frame, never used the goggles and my main radio is an RM Boxer so the case was destined for the bin, but it's a little good to just waste so I cut the liner out and made my own for transporting some of my smaller quads safely.
I will include a blank liner to edit in Fusion360 (.F3d) & a step file for other CAD applications.
I will also include the ones I have made for my quads as an example. I see no reason inserts cannot be made to fit within the liner so this can be used for storage/tools/radios/whatever.
I cut the liner out with a hobby/craft knife then hot glued the liners in. Get the bottom in first then part the sides, squeeze in the glue then squeeze the side close and hold for a minute or two to cool. One side at a time and all done.
I created a bit of a gap at the bottom to allow space for the velcro ang glue it in with superglue to ensure it stays where it is. I may add some TPU later to the points the quads sit in the case for a little extra grip but for now I'm happy with it.
I have uploaded the meshes as 3mf but if that causes issue for anyone let me know and I will upload STLs