1 / 2
Inserts for carbon X gantry RatRig Vcore
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of the original inserts, they are slightly smaller for better fitting
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 46
- Makes
- 0
- Views
- 274
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Original Parts:
https://www.printables.com/model/201449-ratrig-vcore-3-mgn9-carbon-gantry
My carbon X gantry bought on Aliexpress isn't perfectly square on the inside, specially around the corners.
It's important that the inserts have a perfect fitting:
- too loose: risk of vibrations
- too tight: risk of damaging the gantry specially with termal expansion
This remix adds a more agressive chanfer to the inserts and 2 different models with looser tolerances than the original (each side of my carbon gantry was slightly different…)
Model A : 17.45mm x 17.45mm
Model B: 17.10mm (height) x 17.45mm (width)