Reptile Dragon 2 Top Plate Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Top plate mount blank and gopro version. STEP files included to slap on whatever you want in you favourite CAD editor.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 44
- Makes
- 0
- Views
- 405
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
Plane Model: Reptile Dragon 2
Use: Mounting plate for the top cover.
Files:
- Blank plate 2mm & 4mm
- Plate with standard GoPro mount 2mm base for RIGID filament
- Plate with standard GoPro mount 4mm base for FLEX filament
- STEP file to unleash your creativity
I suggest that this is printed in TPU at 100%/high infill for 2 reasons:
1. The top plate cover on the model has a slight bow to it - allows mount to conform
2. Allows you to run some zip ties through the two extra holes as a backup.
If you are using Rigid filament (PLA/PETG/ABS etc.) the 2mm version can be used. Alternatively, please modify the .step file as you please.
Hardware:
RIGID 2mm
4 X 10mm M3 Flat Hear Screws (Model is designed with flat head screws, adapt where necessary
2 X zip ties
FLEX 4MM
4 X 12mm M3 Flat Hear Screws (Model is designed with flat head screws, adapt where necessary
2 X zip ties
WARNING: If using with a heavier action camera (e.g. GoPro 10) please ensure to tape down your covers during flight. There is a lot of weight on the top foam cover with only a few magnets holding it on. Don't lose your camera - use tape ;)
If this model helped you in any way shape or form - please rate, comment and or post a make if you can.
Enjoy!