Bambu Lab P1P Compact Purge Bucket (magnetic) - REMIX
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I added the Bambu logo to the back of the model. You can paint it in the slicer for multi-color printing.
- Rating
- 5 / 5
- Likes
- 43
- Downloads
- 654
- Makes
- 7
- Views
- 3,441
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is nilson_fx's magnetic poop chute accessory for the Bambu Lab P1P, but with the Bambu Lab logo. I used Brody's Bambu Lab logo SVG file.
I started by importing the waste bin into Fusion360. Then, I imported the SVG and extruded it into a shape. I scaled it to a decent size and aligned the logo with the back of the bin.
As recommended in the original model, use 10mm*3mm magnets held in place by glue and make sure to test proper orientation before securing them into the slots.
This will print best at 0.1-0.12mm layer height. I suggest using at least 3 perimeters and 4-5 top and bottom layers. This should not require any supports and you can even try to increase the external wall line thickness by 0.02-0.03 to clean up the overhang portion a tiny bit. You can also try using arachne slicing if you wish.
I also recommend pointing the logo towards the aux fan if you have it, and also adding a purge tower, so the model has uniform cooling.
Please respect the original author's license preferences.