Horizontal Ceiling Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Horizontal mounted ceiling spool holder for tight places for spools of inner diameter of min. 50mm and upto 80mm width.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 87
- Makes
- 2
- Views
- 711
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a ceiling mounted spool holder especially for places with restricted space. The spool can be mounted and unmounted with only about 15mm of space underneath the spool holder. The spool rests on a disc that rides on the ball bearings for a smooth rolling action.
Is is recommended to use a PTFE tube long enought to reach all the way onto the spool itself.
The holes and grooves in the lower part are for getting a good grip when screwing the holder with the spool on it into the top part.
The inner thread of the top mount is already shrunk by 5% for a good thread fitting.
Supported Spools
min. inner diameter: 50mm
max. width: 80mm
Hardware
- 5x 625 ball bearing
- 5x M5 hex nut
- 5x M5 20-30mm socket head screw
The M5 screws can be any length in the given range.
- 3x 3-4mm counter sunk screw
The counter sunk screws are ment for usual wood screws. It's also possible to use other 3-4mm screws.
You like my work? You can buy me a coffee to support me and supply fuel for more creative ideas :)