1 / 2
Bambu Lab X1 and X1C Nozzle Wiper Reduced 2mm — image 1
1 / 2

Bambu Lab X1 and X1C Nozzle Wiper Reduced 2mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Wiper for bambu lab x1c or x1 that is shorter by 2mm

Rating
5 / 5
Likes
50
Downloads
223
Makes
2
Views
2,148
Reviews
1

Updated at source:

Model information

License
Creative Commons — Public Domain

If you are running an aftermarket hot end with replaceable nozzle on  your bambu x1 or x1c, then you are likely 2mm lower than the original nozzle.  So I remixed the wiper to be 2mm lower.  Works with m6 cht nozzle.  Printed laying on back with traditional support.  I used 0.1mm layer height on a 0.6 nozzle.  You will need a screw from another wiper and ptfe tube section for the roller portion. I recommend printing in something stronger than regular pla.  It does take some abuse.  I did beef up the rings at the top, so ptfe tube will be a little shorter.  But it still works. 

Tags