Smartmeter Interface Housing
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.01 – €2.46 net (excluding VAT)
For file: Gehaeuse SM_0.6n_0.4mm_PETG_MK3S_1h20m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.24 excluding VAT (range midpoint).
- Weight reported by the author
- 50 g
- Print time reported by the author
- 1.34 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
for ESP32 and MicroE M-Bus Slave
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 246
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Housing for ESP32 Wroom plus MicroE M-Bus Slave Board.
Reads all the relevant values from Smartmeter Kaifa MA309M with ESPHome Software from DomiStyle and integrates it into Homeassistant/MQTT.