Simple 1x and 2x Radius Finder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.55 – €1.89 net (excluding VAT)
For file: Radius Finder 2X_0.2mm_PLA_MK3S_1h48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.72 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 1.79 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple radius finder using calipers.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 63
- Makes
- 1
- Views
- 340
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use this tool to find the radius of an object with your calipers. This was created to keep the math simple. Using the 1x model, the radius of the object is exactly as measured. Using the 2x model, the radius of the object is twice the measurement.
This model was printed with PLA and uses almost the entire print bed for the Prusa MK3S+