FilaSpoolCase
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
::UPDATE:: Added version Z that does not require a spool core (typically comes with Geeetech / Creality printers).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 39
- Makes
- 0
- Views
- 370
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
::UPDATE::
Added version Z that does not require a spool core (typically comes with Geeetech / Creality printers).
::UPDATE::
Added an adaptor for M6 pushfits - for use with ptfe tube | PC4-M6 for 4mm OD tubing / 1.75mm filament | PC6-M6 for 6mm OD tubing / 3mm filament
Note: I find the unthreaded one works better
::UPDATE::
Now snap-able and one size fits all! (fits either 1.75 or 3mm filament)
Simplified silica packet compartment and core, and thinned down the base for easier and quicker printing
Print instructions
The snap-fit pegs are 4mm in diameter
Part A comes in 3 different snap-fit hole sizes - the number at the end of the file name corresponds to offset radius:
filaspoolcase-X-A-0.05.stl = 0.05mm
filaspoolcase-X-A-0.1.stl = 0.1mm
filaspoolcase-X-A-0.2.stl = 0.2mm
actual hole size = 4mm + 2 x offset radius
Use this fit test to determine which one will work best for you: https://www.thingiverse.com/thing:3513594
So if your peg fits, let's say, hole size 4.1 (diameter), then you'd need to print part A size 0.05 (radius)
Print without support
I used an Anycubic Chiron (400x400x450)Suggestion: tape the seam up with masking tape