Band themed 45 record adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 45 record adapter represents a band and shows you something different from all sides.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 86
- Makes
- 1
- Views
- 496
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Share Alike
About:
This 45 record adapter represents a band. It features a fender electric guitar, a microphone and a speaker, each visible from a different side.
Feel free to remix and make different instruments or post a make!
Print instructions:
- For the base of the model I made two versions, one with no tolerances and a second one with some slight tolerances which printed more reliable in my experience.
- To preserve as much detail as possible I recommend printing the Guitar_housing, Microphone_condensor and Speaker with 0.05-0.1 mm layer heights, the other parts can be printed with 0.2 mm layer height to reduce the print time.
- All parts are capable of being printed without supports in the oriëntation of their STL-files
Assembly:
Note: For the assembly some glue is required.
- First, assemble all individual parts (guitar and microphone) such that you have the parts in the image on the right, for this no glue is required but I used some just to be sure.
- Glue all of the instruments in place on the base plate. The only part that requires glue here is the guitar, however again I also used glue for the microphone and speaker just to be sure.
- The final product should look something like this:
