OverWatch Logo 40x40 multi parts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I decide to make a big logo, but my printer only have a 20x20 bed, so i design this in multiple parts to be able to…
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 52
- Makes
- 0
- Views
- 668
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
I decide to make a big logo, but my printer only have a 20x20 bed, so i design this in multiple parts to be able to print on my prusa.
This logo is 40x40 once assemble, depend on your printer bed size you can increase the printed parts size.
UPDATE: Spacer + Spacer screw add ( this will allow you to set the distance between the wall and the Overwatch logo, so the light can be reflected.
I did glue this parts with epoxy.
Material that i use:
- Prime spray
- Orange spray
- Metal spray
- M3 screws / nuts
Print instructions
Category: Signs & Logos Summary
I decide to make a big logo, but my printer only have a 20x20 bed, so i design this in multiple parts to be able to print on my prusa.
This logo is 40x40 once assemble, depend on your printer bed size you can increase the printed parts size.
UPDATE: Spacer + Spacer screw add ( this will allow you to set the distance between the wall and the Overwatch logo, so the light can be reflected.
I did glue this parts with epoxy.
Material that i use:
- Prime spray
- Orange spray
- Metal spray
- M3 screws / nuts
Print Settings
Printer: BQ prusa I3
Rafts: No
Supports: No
Resolution: 0.3
Infill: 20%
Notes:
Easy print.