1 / 11
Rigid EBB36 v1.2 mount on Voron CW2 / Stealthburner - Tested on VT
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a rigid EBB v1.2 mount for the Voron ClockWork 2 (CW2) used in the StealthBurner toolhead.
- Rating
- 5 / 5
- Likes
- 64
- Downloads
- 622
- Makes
- 2
- Views
- 4,213
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This is a rigid mount for the BTT EBB3.6 v1.2 toolhead board on the ClockWork2 / Stealthburner. The plate is supported on three points and a lot more rigid than other solutions. It was only tested on a Voron Trident. No tests currently on the V2.4.
BOM:
- 7x M3x5x4 standard Voron heat set inserts
- 5x M3x8 screws
- 1x M3x20 screw
- 3x zip ties
Please print the STLs with standard Voron settings without support. Orient for printing the bodies so that they are flat side is on the build plate. STLs to print and quantities:
- 1x Mounting plate
- 2x Standoff
- 2x Spacer
How to build: See screenshots
Have fun and leave a make/like if it is useful :-)