1 / 11
Rigid EBB36 v1.2 mount on Voron CW2 / Stealthburner - Tested on VT — zdjęcie 1
1 / 11

Rigid EBB36 v1.2 mount on Voron CW2 / Stealthburner - Tested on VT

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a rigid EBB v1.2 mount for the Voron ClockWork 2 (CW2) used in the StealthBurner toolhead.

Ocena
5 / 5
Polubienia
64
Pobrania
622
Wydruki
2
Wyświetlenia
4213
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

This is a rigid mount for the BTT EBB3.6 v1.2 toolhead board on the ClockWork2 / Stealthburner. The plate is supported on three points and a lot more rigid than other solutions. It was only tested on a Voron Trident. No tests currently on the V2.4.

BOM:

  • 7x M3x5x4 standard Voron heat set inserts
  • 5x M3x8 screws
  • 1x M3x20 screw
  • 3x zip ties

Please print the STLs with standard Voron settings without support. Orient for printing the bodies so that they are flat side is on the build plate. STLs to print and quantities:

  • 1x Mounting plate
  • 2x Standoff
  • 2x Spacer

How to build: See screenshots

Have fun and leave a make/like if it is useful :-)
 

Tagi