Slim X Endstop - Ender 3 V2 Neo
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slim Adjustable X Endstop Limit Switch for the Ender 3 V2 Neo
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 320
- Makes
- 4
- Views
- 2,811
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution
Slim Adjustable X Endstop Limit Switch for the Ender 3 V2 Neo
Increases visibility and access to the X axis belt for checking alignment and shimming.
Frees up one mounting point for other uses.
Position A : Original
Position B : -8.4 mm
In case there is not enough clearance between the belt and the casing when the tool head is next to the switch, consider installing this mod ( You should do that anyways :) )
X Belt Shims - Ender 3 V2 Neo
Hardware:
Reuses Original hardware
Installation:
-Remove the original cover by removing the two screws (top and botton) and the connector
-Remove the PCB holding the switch, and strip the hot glue
-Insert the PCB into the Inner Shell
-Insert the A or B shim
-Insert the Inner Shell into the Outer Shell
-Plugin the connector
-Slide the new case onto the lower bracket and attach the screw
-Move the tool head and check for belt clearance
You can also consider this upgrade to make your X belt path buttery smooth:
X Belt Tensioner - Ender 3 V2 Neo
Enjoy!