X-Acto Letter Opener
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.54 – €0.66 net (excluding VAT)
For file: Letter Opener Body_0.2mm_PETG_MK3S_39m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.60 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 38.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A letter opener for envelopes using an X-Acto #11 blade.
- Rating
- 4.778 / 5
- Likes
- 82
- Downloads
- 518
- Makes
- 10
- Views
- 2,628
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Because this model relies on an X-Acto blade, the letter opener easily slits envelopes. This model was printed with 15% infill using PETG. Support from the build plate was used to help maintain curvature of the edges. The GCODE file contains a pause during the build to place the X-Acto #11 blade into the part. The blade cannot be added or removed after the part is built.
The Fusion 360 and step models are included if slight variations due to printer tolerances or other blade sizes require adjustments.
Caution: X-Acto blades are sharp. Handle with care.