ESP8266 Case (for NodeMCU Dev Kit V1.0), USB port & RST button accessible!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a very snug case for the ESP8266 NodeMCU Dev Kit V1.0. It exposes the USB port and the RST button.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 51
- Makes
- 0
- Views
- 751
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v3.0
This case was designed purely as a protective layer for this board, to prevent damage when transporting it in a backpack or short-circuits when placed pins-down on a conductive surface. This is also the reason why the pins are not exposed. A compliant part of the case makes it possible to reset the board via the on-board reset button. The EMI shielding of the board is only exposed for clearance issues, but it also looks kinda nice :)
Apart from the printed parts, you will need the following:
4x M3x14mm screws
4x M3x5.7mm threaded inserts (the ones by CNC Kitchen are ideal)
Printing:
- No supports when printing both the bottom part right side up and the top part inverted. A brim for the bottom part is recommended, as the rather long bridges could lead to the print warping off the bed otherwise.
- Use a very low layer height and, if possible, a small nozzle diameter! Especially the reset button mechanism is very delicate, a small nozzle diameter is going to help a lot!
I printed it using the E3D REVO system with a 0.25mm nozzle.
Assembly:
- Use a soldering iron to insert the threaded inserts into the bottom part.
- Insert ESP, place cover on top. Insert and tighten screws evenly.
The fit of the parts is pretty tight, I recommend tightening the screws crosswise and of course carefully as to not damage your ESP.
Happy printing!