Creality Ender 3 BMG + E3D Volcano Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extruder. Extruder Bracket for Linear Rails.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 76
- Makes
- 0
- Views
- 2,505
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Extruder.
Extruder Bracket for Linear Rails.
Just 5 easy to print parts that can be used to mount a Bondtech BMG or clone along with an E3D Volcano hotend to an MGN9H or MGN12H Linear rail.
I use this setup now on my Ender 3's but it could be used on other machines.
I have also provided a drawing with dimensions so that the actual main mount can be cut and drilled out of aluminium.
This is what i did and used 100x50mm Aluminium angle i purchased from ebay for a couple of pounds. It makes for a lot stiffer mount and is pretty straightforward to do with basic tools. You can see it in the pictures.
Materials:
BMG Extruder - Aliexpress
BMG + Volcano - Aliexpress
4 x M3x8mm Button Head Bolt
6 x M3x12mm Cap Head Bolts
3 x M3x20mm Cap Head Bolt
3 x M3x40mm Cap Head Bolt
1 x M3 Locknut
And That’s it.
Enjoy :-)
Print instructions
Print Settings
Printer Brand: Creality
Printer: Ender 3
Supports: Doesn't Matter
Resolution: 0.28
Infill: 30%
Notes:
Printed in Sunlu Filament Black PETG purchased from Amazon.
Print Temp : 240°C
Bed Temp : 80°C
Print Speed : 50mm/s
Top Layers : 4
Bottom Layers : 4
Perimeters : 2
Printed on Buildtak.