Adafruit 5" 800x480 display mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.01 – €1.24 net (excluding VAT)
For file: Adafruit 5_ backpack - Corner Bracket_PLA_1h16m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.12 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.27 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I use this for klipperscreen. Mount for: Adafruit Industries HDMI 5" 800x480 Display Backpack - With Touchscreen .
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Mount for the Adafruit Industries HDMI 5" 800x480 Display Backpack - With Touchscreen.
I got mine at Microcenter: https://www.microcenter.com/product/613550/adafruit-industries-hdmi-5-800x480-display-backpack-with-touchscreen
SKU was 006676, part number is 2260.
I use it for Klipperscreen.
BOM:
4x M3x6mm (maybe 8mm would be easier) bolts
1x M3x10mm bolt
5x M3 nuts
4x construction screws
To get this display working on my pi4 was a major pain. The guides online didn't work. The resolution was constantly completely wrong.
I installed KlipperScreen using kiauh, then:
I added these to /boot/config.txt:
hdmi_group=2
hdmi_mode=87
hdmi_cvt=800 480 60 6 0 0 0
hdmi_drive=1
max_usb_current=1
In /boot/config.txt, I changed this:
dtoverlay=vc4-kms-v3d
to this:
dtoverlay=vc4-fkms-v3d
I created the file /usr/share/X11/xorg.conf.d/90-monitor.conf which contained the following:
Section "Monitor"
Identifier "HDMI-1"
Modeline "800x480_60.00" 29.50 800 824 896 992 480 483 493 500 -hsync +vsync
# This identifier would be the same as the name of the connector printed by xrandr.
# it can be "HDMI-0" "DisplayPort-0", "DSI-0", "DVI-0", "DPI-0" etc
Option "Rotate" "normal"
# Valid rotation options are normal,inverted,left,right
Option "PreferredMode" "800x480_60.00"
# May be necesary if you are not getting your prefered resolution.
EndSection
After that, I rebooted, and it worked.