Face Plate Logo for DJI Mini 3 Pro Hard Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For the Judunmsk Mini 3 Pro hard case, you can replace the faceplate with a DJI logo, or your own design.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 18
- Makes
- 0
- Views
- 487
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
For this specific case: https://www.amazon.com/dp/B0B1B1Y77L
You can unscrew and replace the little faceplate logo on the cover. I added my own logo. You can add the DJI logo (both an “innie” and an “outtie” version) or you can use the blank plate to add your own logo.
If the holes are too small for the screw to get it flush, you can stick an Xacto knife in each hole and rotate it to make it smaller
I have the RC version (controller where you connect your phone) but it looks like the RC-N1 case has the same design.