1 / 17
customizable beer crate with individual text and logo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
beer crate customizable in size, floor and wall thickness, compartments (x and y), floor grid, text, logo from svg aso.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 137
- Makes
- 0
- Views
- 683
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
To be honest, I was a bit annoyed that there are so many beer crates for batteries but none of them is customizable the way I'd like it to be. So I created my own, that I'd like to share herewith…
beer crate customizable in
- crate
- color
- number of rows (x)
- number of columns (y)
- wall thickness
- with or without stackability on top
- with or without stackability on bottom
- stackability tolerance
- outer corner radius (z)
- lateral recess
- height above recess (z-position)
- height
- size in % (x and y)
- corner radius
- floor
- height
- with or without grid (holes)
- grid with rectangles or triangles
- triangle wall thickness
- bottle / battery / whatever
- diameter
- height
- grid
- height
- wall thickness in x-direction
- wall thickness in y-direction
- conical or not
- top diameter of glas (bottom of crate)
- logos from svg
- with or without logo in x-direction
- with or without logo in x-direction
- color
- filepath x-direction
- filepath y-direction
- logo positive or negative from wall
- height (positive or negative)
- z-angle in x-direction
- z-angle in y-direction
- size in x-direction
- size in y-direction
- text
- with or without text in x-direction
- with or without text in x-direction
- color
- text x-direction
- text y-direction
- text positive or negative from wall
- height (positive or negative)
- z-angle in x-direction
- z-angle in y-direction
- size in x-direction
- size in y-direction
- aso.
All comments currently in German. Please message me if you cannot find translation.
Updates
- 03.04.2023: corrected minor mistakes in scad-file
- 03.04.2023: added possibility to adjust z-angle for higher texts and logos
- 14.05.2023: possibility to make conical fitting (especially for glasses) at bottom part of crate (see Gabriel glas stl-file)