Case for raspberry pi 4 with 5 inch display for Klipper
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for raspberry pi 4 with 5 inch display for Klipper
- Rating
- 0 / 5
- Likes
- 41
- Downloads
- 438
- Makes
- 0
- Views
- 4,766
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Case for raspberry pi 4 with 5 inch display for Klipper.
The design revolves around the display: CUQI brand 5 inch DSI touch display from amazon.
I am using this display since a couple of days with a Klipper installation. This is not a recommendation, but in case you might have this already, this case could be useful for you.
- There are 3 parts:
- the main case: insert the display from the from the front side
- a back cover: I glued small magnets to hold this in place
- and a stand (there are screw holes for other possible mounting also)
The screw-holes are for 4M threaded inserts.
There are cut-outs inside the case for the display connections. USB connectors, etc.
Print the back cover standing up, that way no supports are required.
Note: with the current Klipper image the touch function of the display will not work. You'll need to adjust some settings in the /boot/config.txt to “dtoverlay=vc4-fkms-v3d”