1 / 6
Highly Accurate Adjustable Jack Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Geometrically accurate replica jackstand I made. Please like!
- Rating
- 0 / 5
- Likes
- 58
- Downloads
- 232
- Makes
- 0
- Views
- 1,200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Share Alike
Replica of my Harbor Freight aluminum jack stand I originally modeled for a Finite Element Analysis project.
General Printing Tips
- STL provides near 1:1 scale geometry. I printed at 50% to make a nice mini. Printing at significantly less may be difficult
- I highly recommend using organic supports for the lever bar. Picture is shown above.
- Recommended print orientation for ratchet bar is also shown. Basic supports and 1cm brim were used but may not be necessary.
- Adjustor pin is optional. I initially thought it would be necessary, but my printer was capable of creating tight enough tolerances where it was not needed.
Other Printing Tips
- Print lever bar, lever bar cap, and adjustor pin(optional) at 99% of your selected print scale. This provides a safety tolerance for part fitment.
- Obvious but I guess it should be noted, this should NEVER be used for safety. It can definitely support some objects like toy cars though.
Please like, share your makes, and don't hesitate to ask any questions below!!!