Duo-2-Go 2-Port Controller Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple to print, print face down. This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350.…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Simple to print, print face down.
This PSU Mount is designed to fit the standard hole dimensions for Meanwell LRS 350. This will hold 2 PSUs and removes the need for an extra mount setup for stacking the PSU's
The design has a in-cut on the bottom to allow for nuts/bolts to rest above the PSU. Design only uses top screw holes on the PSU to allow the bottom to be used for PSU mounting.
Mounting Hardware:
4x - M4 - 8mm bolts (secure mount to PSU)
4x - M3 - 12mm bolts/nuts (secure controller to mount)
RGB 2 Go Controller: https://rgb2go.com/products/duo2go-pixel-controller
MW LRS 350 - https://www.amazon.com/LRS-350-24-Enclosed-Switching-Replacement-Termina
MW LRS 600 - https://www.digikey.com/en/products/detail/mean-well-usa-inc/LRS-600-27/16394232
Category: Electronics