Print-in-place fish-eye rod end for fischertechnik
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A print-in-place fish-eye / ball joint bearing rod end for fischertechnik 4 mm axles.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 164
- Makes
- 0
- Views
- 869
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A print-in-place fish-eye / ball joint bearing rod end for fischertechnik 4 mm axles.
Requires an original fischertechnik Spannzange Z22 m0,5 (#35113) for fastening.
The maximum angle between the two axles is
- ca. 130° without fixing
- ca. 120° with two pieces Abstandsring 3 and
- ca. 110° with two pieces Klemmbuchse 5.
Important: Print this in the default orientation, i.e. laying flat with support or else the print-in-place bearing will stick. The thread is intentionally missing at the top and bottom to allow for a clean print in this orientation.
See also https://www.thingiverse.com/thing:5931102 and https://www.thingiverse.com/thing:5930154 for alternative designs.
Please consider leaving a "like" as a token of appreciation for my work.
Find my other fischertechnik designs here.
Category: Construction Toys