1 / 5
ULX3S Case (OLED/LCD Supported)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case/Enclosure for ULX3S FPGA Board
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 54
- Makes
- 0
- Views
- 364
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Case for ULX3S with cutout for a display
I soldered pin socket connectors to the board and then the display sits above the case top when plugged in
I used 0.2mm layer height
Don't use brim for the case, some brim lines can be impossible to tear off.