1 / 2
Cutting Guide / Jig 16mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cutting guide for 16mm wood metal pvc rods
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 33
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Simple cutting guide for rods with a diameter of 16mm.
I used it to cut wooden rods.
You might have to scale the model as most printers overextrude a little.
The hole is modeled with a diameter of 16.4mm.
Sand the top overhangs in the hole, they will probably sag too much.
Use multiple supports, that way you can apply more pressure and it will be easier to cut.