Passive Extruder Stepper Motor Cooling Cover - MK3/S NEMA17
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple but effective way to cool your extruder motor. Mine peaked at 85°C and I was looking for a way to cool it.
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 301
- Makes
- 3
- Views
- 4,300
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple but effective way to cool your extruder motor. Mine peaked at 85°C and I was looking for a way to cool it. I didn't have problems but read around the internet that this can cause jamming since the gears can get hot causing PLA to wrap around them.
This modification reduced the temperature of my extruder by 15-20°C.
What you need:
40mm Heatsinks: https://www.amazon.de/gp/product/B07C7SJHTH/ref=ppx_yo_dt_b_asin_title_o05_s02?ie=UTF8&psc=1
Thermal Interface Pad: https://www.amazon.de/gp/product/B00UYTTLI4/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1
Print instructions
.gcode is sliced using a Simplify3D PETG Profile. I highly recommend PETG for temp. resistance. PLA might work but can get soft.
The cover itself sits loose on the extruder without heatsinks. The heatsinks should sit tight inside the frame. Since the thermal pads are sticky, it won't come loose and sits tight.
You can attach heatsinks without this frame too, but I had one falling off during fast movement. That's why I created this cover.
Make sure to clean the heatsink and extruder with IPA first before applying the pad.