1 / 1
ROPE OR CABLE SADDLE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a robust saddle for those times when the hardware shop is just too far away!
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 171
- Makes
- 1
- Views
- 619
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple saddle - prints on its side with no support needed. I used PETG at .3mm layer height and four perimeters so they'd print solid without infill.
They were originally designed to hold towels and clothes in our camper and worked perfectly, and I've since used them to secure electrical extension leads. The “eye” is 6.5mm (about ¼") and the depth about 50% more than that to allow some "wiggle room".