Cloud Gate aka "The Bean" Ornament
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix of a model of the Cloud Gate aka "The Bean" in order to convert it into a holiday ornament!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 80
- Makes
- 0
- Views
- 438
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
This is a remix of the Cloud Gate aka "The Bean" model. I reduced the scaling of the original model and added a sturdy loop on top so you can hang it as an ornament!
Highly recommend painting it with this paint afterwards to get that true 'bean' look: https://www.culturehustleusa.com/collections/potions/products/mirror
Print Notes
Should use a 0.4mm nozzle or smaller. Infill shouldn't need to be too high, but I would recommend a gyroid or cubic pattern to get that x + y + z strength, as well as connecting infill lines.
Definitely need supports for this one, I would recommend keeping infill down so you can also keep the support density lower - that way you have less postprocessing after removing the supports.
Post-Processing
You are probably going to want to sand and prime it a few times with increasingly fine-grain sandpaper after removing the supports. Primer will help fill in gaps. This is especially necessary if you are planning to paint it with anything reflective.