1 / 6
Garden Hose Coupling Lock Nuts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lock nuts for your generic garden hose coupling.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 1
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
You can now 3D print the lock nuts for a generic garden hose coupling.
Material: PLA, PETG, PC, ABS, ASA or Nylon.
Nozzle: 0.4mm nozzle and line width or finer (smaller).
Parameters: 100% fill or enough walls, top and bottoms for 100% fill. Layer height 0.2mm
Here is my old used coupling:
Here you can see the lock nuts. They are here printed in yellow PLA.
Here you can see a lock nut mounted, but with the enclosed shroud removed.
This is how you can remove the enclosed shroud holding the lock nuts in place:
