Conduit Pipe Cap
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.38 – €0.46 net (excluding VAT)
For file: pipe cap_0.3mm_PETG_MK3S_27m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.42 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 27 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Pipe cap for electrical conduit found at your hardware store.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 63
- Makes
- 1
- Views
- 540
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple electrical conduit end cap. I used this to place over the top end of conduit I used to mount LED canopy lights on my deck. This keeps things like water and bees out of the conduit when mounted outside.
This model was printed in PETG in draft mode at .3mm and 20% infill. The cap is a simple friction fit over the end of the conduit.
This model used the PrusaSlicer's negative volume cylinder for the hole placement in the cap. Open the model file and reslice in PrusaSlicer to generate your own GCODE. I did not include STL files because they don't reflect the Negative Volume feature.