1 / 1
Long PTFE Spacer for MMU
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Long PTFE 4mm tubing spacer with 45mm between five holes
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 103
- Makes
- 3
- Views
- 502
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a long PTFE Tube spacer for 4mm OD tubes. The holes are 45mm apart. The holes are 4.5mm in diameter. This could be used as a spacer between the buffer and the spools.
This is also a part of my larger system - https://www.printables.com/model/555238-mcs-multi-color-system-for-prusa-mmu
There is a slight internal curved path to the holes (a circle of 190mm) so if placing on a hill the bumps should face up. This curve is there as most paths have a slight curve to them and this also helps grip the tubes better without making the hole narrower.