1 / 3
8020 series 10 45 degree ofset beam for fan mount — image 1
1 / 3

8020 series 10 45 degree ofset beam for fan mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

As part of my reflow toaster oven project I need a way to mount a fan at an angle.

Rating
0 / 5
Likes
12
Downloads
36
Makes
0
Views
599
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

As part of my reflow toaster oven project I need a way to mount a fan at an angle. The beam can be use mount things and sensors at a 45 degree angle to another beam. A word of caution, we do not usually use printed beams for structural purposes. Use at your own risk.

The fan mount can be found here:

https://www.thingiverse.com/thing:4621872

https://www.prusaprinters.org/prints/46141-8020-fan-mount-for-120-mm-fan-43mm-wide

or if you want to mount the fan directly to a beam:

https://www.thingiverse.com/thing:4621888

https://www.prusaprinters.org/prints/46140-8020-fan-mount-for-120-mm-standard-width

It is compatible with 8020 series 10 end connectors and t-nuts. It is also possible to use a standard 1/4-20 pan head screw in the end of the beam. The beam is printed tapped for a screw.

It is a derivative of: https://www.thingiverse.com/thing:3589546

Print instructions

Category: Electronics Summary

As part of my reflow toaster oven project I need a way to mount a fan at an angle. The beam can be use mount things and sensors at a 45 degree angle to another beam. A word of caution, we do not usually use printed beams for structural purposes. Use at your own risk.

The fan mount can be found here: https://www.thingiverse.com/thing:4621872 or if you want to mount the fan directly to a beam: https://www.thingiverse.com/thing:4621888

It is compatible with 8020 series 10 end connectors and t-nuts. It is also possible to use a standard 1/4-20 pan head screw in the end of the beam. The beam is printed tapped for a screw.

It is a derivative of: https://www.thingiverse.com/thing:3589546

Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: Yes

Supports: Yes

Resolution: 0.2

Infill: 25%

Filament: Inland PLA black
Notes:

I used red fillament because I don`t have black filament at this moment. Will paint it in black color, not a big deal)))

Tags