8020 series 10 45 degree ofset beam for fan mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As part of my reflow toaster oven project I need a way to mount a fan at an angle.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 600
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
As part of my reflow toaster oven project I need a way to mount a fan at an angle. The beam can be use mount things and sensors at a 45 degree angle to another beam. A word of caution, we do not usually use printed beams for structural purposes. Use at your own risk.
The fan mount can be found here:
https://www.thingiverse.com/thing:4621872
https://www.prusaprinters.org/prints/46141-8020-fan-mount-for-120-mm-fan-43mm-wide
or if you want to mount the fan directly to a beam:
https://www.thingiverse.com/thing:4621888
https://www.prusaprinters.org/prints/46140-8020-fan-mount-for-120-mm-standard-width
It is compatible with 8020 series 10 end connectors and t-nuts. It is also possible to use a standard 1/4-20 pan head screw in the end of the beam. The beam is printed tapped for a screw.
It is a derivative of: https://www.thingiverse.com/thing:3589546
Print instructions
Category: Electronics Summary
As part of my reflow toaster oven project I need a way to mount a fan at an angle. The beam can be use mount things and sensors at a 45 degree angle to another beam. A word of caution, we do not usually use printed beams for structural purposes. Use at your own risk.
The fan mount can be found here: https://www.thingiverse.com/thing:4621872 or if you want to mount the fan directly to a beam: https://www.thingiverse.com/thing:4621888
It is compatible with 8020 series 10 end connectors and t-nuts. It is also possible to use a standard 1/4-20 pan head screw in the end of the beam. The beam is printed tapped for a screw.
It is a derivative of: https://www.thingiverse.com/thing:3589546
Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Yes
Supports: Yes
Resolution: 0.2
Infill: 25%
Filament: Inland PLA black
Notes:
I used red fillament because I don`t have black filament at this moment. Will paint it in black color, not a big deal)))