The Lightbox, an ender 3 neo hot end cover with LED
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds space around the nozzle to illuminate it, as well as increased viewing angles.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 46
- Makes
- 0
- Views
- 867
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Features:
- 3 angled strips for attaching LED strips to
- Increased front viewing angle towards the nozzle
You can use any lighting solution you like, or one that you do not like.
A standard 24v cool white (5000k+) LED strip is ideal.
Make sure you use silicon wires, not PVC coated. If a PVC coated wire rests against a hot part it might melt, short out, and kill your printer.
It should screw together without the need for brass inserts using the original printer's hardware and fan. If your print does not I'd suggest drilling out the holes a little and using an insert anyway.
3 versions of the model are available, named for the difficulty of printing them. If your printer is not dialed in well go with the simple version.
For the semi complex and complex I would suggest a slow travelspeed. The triangles have a tendency to warp upwards which the nozzle may impact on the next layer. A travelspeed of 30 or less makes the nozzle melt through the lip, ironing it, rather than push against the entire model potentially causing a failed print.
Print face down and include the support.stl on the long bridge on the side. Rough align on the XY is fine, but input Z as 14.8 and make sure you turn off "drop down model" in your slicer. Refer to final picture.
No other supports should be necessary.
Update 09-10-2023
V2.2, changed the grill next to the screw a bit. It proved to be a weak point with repeated instal/removal. Should be stronger now.