1 / 3
Rubber Pin Stop (Bally Part Number: R-231-7)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rubber Pin Stop for Bally Pinball cabinets
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
Here is my version of Bally p/n: R-231-7 see image for dimensions. This works for my Bally cabinets. Note, it can be a bit difficult to get it into the hole. I used a small flat screwdriver to help push it in. Once it's fully in the hole it stays in very well.
Print Details:
Filament: soft TPU
Layer Height: .20mm
Perimeter Shells: 1
Lower Layers: 2
Upper Layers: 3
Infill 1: 15% Gyroid
Infill 2: 100% for the stem
Print Time: ~10 minutes