Counting matching models…
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4 with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the.pdf decals on 8.5 x 11" paper (preferably…
This is a Theater of Magic Trunk. Theater of Magic is a Bally 1995 pinball game that is quite well regarded. The trunk is a main target and the original and replacements crack and break. Occasionally flexible replacements have been made…
Print 100% infill. Remove the screw which removes the lightbulb in the coin return button. Mount this through that hole with the screw. Attach leaf switch to other side and wire to coin1 or coin 2 on your controller board.
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4S with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the.pdf decals on 8.5 x 11" paper…
Want some coasters for your arcade/mancave that are themed? Well here are some coasters that have the Bally/Williams logo. Both coasters are 100mm in diameter and 5mm high. Now Updated with a Gottlieb Pinball coaster. Print Settings…
Simple tool used to compress the plastic standoffs that hold Bally/Stern boards. I find it easier to use than needle nose pliers. Just press the tool over the standoff to disengage it from the board and gently pull the board off with the…
Standard Bally Wedge Top Drop Target. It's always better to buy injection molded drop targets when you can, but if you're in a pinch, this will do the trick. Works for both side-by-side and in-line installations. PETG is recommended, as…
A coaster of the stencil from the side of Centaur pinball machines.
A model of the Bally C-907 and c-908 guide rail post and cap. Category: Toy & Game Accessories
This is a full rebuild of all the parts for the Tapper "serve" joysticks (the tap handle) that go below the control panel, but adjusted for 3D printability. You'll need to either have or purchase a repro tap handle. Other things you will…
I made this for a Bally drop target bank. I'm using a roller style micro switch. In the pictures it the switch I used off Amazon. *as of this upload, I have not tested it on my homebrew. Still have to get my coding finished.
Bally / Stern early solid state pinball score display tray. Great option to customize colors during pin restoration. Printing with supports recommended - takes about 2.5hrs on my X1C to print a tray of three with supports. Add some new…
Allied Leisure was small maker of pinball machine that was active only during the 70's, releasing only 15 machine. Known for their unique cocktail table style machine, they use unique parts and assemblies that are normally universal on…
Use this Flash Gordon strobe light baffle to replace your damaged or lost OEM one. And who's isn't lost or damaged after 40+ years, especially when the original one is made of cardboard? Need to have supports enabled to print the mounting…
LED Holder for Pirahna Super-Flux RGB LEDs and Williams/Bally Pop Bumper Bodies Created by Outpost Kodelia ( https://www.thingiverse.com/OutpostKodelia ) License: Creative Commons - Attribution This is designed to fit in the standard…
My pin already came with a broke plastic, but the issue is the ball likes to launch off the ramp and wedge in between the plastic and glass. This should protect you current plastic from getting cracked and/or from the ball getting wedged…
This is a roll over button for a 1964 Bally Skydivers machine. Button was not available from any of the usual sources, so I recreated it. It uses an e-clip to retain it in the play field. Print on a smooth build sheet, with the top of the…
Bad move, human! Art from the side of the backbox made into a coaster. Easy 3 level print. Black, Red, then Silver. What more is there to say? Challenge me!
Insertion dimensions for the hole in the kickplate is 320mm x 240mm.
Insertion dimensions for the hole in the kickplate is 320mm x 240mm.
Print your own finned posts when you want to use a color not offered by current pinball parts vendors. Battle tested with hundreds and hundreds of games played in multiple machines, I've never had one break even with basic PLA filament.…
This Bally shooter lane guide bushing uses a Williams shooter "coil" sleeve. I made this thinking the original part was no longer available...but it is...but if you want to do something on your own, here it is. I printed this with the…
switch cover for classic bally pinball machine, covers the machine so you can't get electricuted aswell as protecting the switch from a short wich could damage the machines boards.
Use this Bally early solid state pinball power switch cover to replace your damaged or lost OEM one. And who's isn't lost or damaged after 40+ years? Created in the style of the OEM, it's slightly shorter to save on filament and not quite…
These are playfield rail covers I designed for my Bally Flash Gordon restoration. Playfield rails are always chewed up and have holes or knots in them. I thought maybe rail covers would not only add a nice cosmetic touch to the overall…
These are coin box area covers that I designed for my Bally Flash Gordon restoration. Sometimes the tops of the coin box framing area have holes in the wood or rough surfaces that are hard to sand so I designed these covers (and the tray)…
Sometimes when using LEDs for the credit light in the apron, you see some of the illumination peeking out on the left side and through the underside of the instruction card. Using this shroud eliminates that and focuses the light upward…
Print your own finned posts when you want to use a color not offered by current pinball parts vendors. Battle tested with hundreds and hundreds of games played in multiple machines, I've never had one break even with basic PLA filament.…
Something I have been working on slowly for the last few years, A near-perfect replica of the Doctor Who Dalek topper featured on the 1992 pinball machine by Bally. What has been an unobtainable part for many years without any comparable…
this is that bubble city thingy bally the failed company's mascot (he comes with a stand) BALLY!
Quick info PET-G, PLA, Nylon+CF (in that order of preference) 100% infill Supports on build plate only The thinner the layers, the better. (0.2mm will function, I'd personally do 0.1mm) This design is unverified and may not function…
When you want to fix sample on a Bally test, you can scratch your fingers with the screw. So I created a simple cap : one which simple (v4) and one which fit with the extremely of the screw (v3). Note : a Bally test (or flexometer) is a…
Here is my version of Bally p/n: R-231-7 see image for dimensions. This works for my Bally cabinets. Note, it can be a bit difficult to get it into the hole. I used a small flat screwdriver to help push it in. Once it's fully in the hole…
Bally logo, great for your game room, etc. Can be affixed to anything via double sided tape or any other ideas you may have.
I wanted to change the “Start” text on a few different coloured buttons that I had for my Virtual Pinball cabinet build, and recently got access to a vinyl cutter, so I figured I'd print out a replacement cap for the buttons so I could…
